4inX16in 250/pk WHITE
E-Zee Cap® Supreme 3.0 oz. is a heavy weight Tear Away stabilizer that is cut specifically to fit in cap frames.
This specially developed stabilizer tears away easily, leaving minimal residual stabilizer. Less stress on the design ensures a quality end product. Tension is maintained with the use of a cap stabilizer, resulting in clean, clear and crisp designs. Runs well at high stitch speeds. Excellent registration with letters as small as 2.5mm. Great for the front, sides and back of structured and non-structured caps. Available in white.
- E-Zee Cap Supreme 3.0 oz. backing
- Heavy weight
- Tear Away stabilizer
- 4" x 16" pre-cuts
- 250 pieces per pack
For use with:
- Heavy twill fabric
- Heavy denim fabric
- Structured baseball caps
- Other structured caps
To prevent “flagging”, be sure that the design is digitized for caps. These designs should stitch from the center out and from the bottom up. Keep the designs within the allotted sewing area of your cap and frame. Most caps require a sharp needle. If you experience needle or thread breaks try using a #80/12 standard eye needle. Using a longer piece of backing that covers two-thirds of the cap may help with hooping. Choose caps that work best with your machine. Underlay stitches can also assist in avoiding “flagging.”
DOCUMENTS & INFORMATIONAL SHEETS
E-Zee Cap® Supreme 3.0 backing product sheet.pdf