Madeira USA
800.225.3001 
8:00am-6:00pm EST
  • Contact Us
  • Register
  • 0
    Your cart is empty.

Ou Sumner location will be closed 10/22. Our Denver and Ontario locations are currently closed.

32-15.15 E-ZEE CUT SPR HFTY PL 3.1oz

32-15.15 E-ZEE CUT SPR HFTY PL 3.1oz

#32-15.15 E-ZEE CUT SUPER HEFTY PLUS JUST RIGHT 3.1oz MADEIRA HEAVY WEIGHT EMBROIDERY BACKING
32-15.15

Product Description

15inX15in 250/pk WHITE



E-Zee Cut® Super Hefty Plus Just Right 3.1 oz. is a heavy weight, Cut Away stabilizer for embroidering with knits and lightly woven fabrics.

Its soft hand is great for high stitch counts and high density designs. It is ideal for full jacket backs and full front sweatshirt designs. Use with heavy fleece, knits and stretchy fabrics.Cut Away backings should be used for unstable and knit fabrics.

Specification:

  • E-Zee Cut® Super Hefty Plus Just Right 3.1 oz. backing
  • White
  • Medium weight
  • Cut Away stabilizer
  • 15" x 15" pre-cuts
  • 250 pieces per pack

How to use:
Cut a piece from a roll or use a piece of pre-cut E-Zee Cut® Super Hefty Plus to fit your hoop size. Hoop by placing the backing underneath the garment. Embroider the design and remove the embroidered item from the hoop. Trim the excess backing with a sharp pair of scissors or shears, leaving approximately ¼” around the outside of the design. Rounding the corners instead of leaving them square or pointed will avoid curling later on.

Helpful Hint:
To avoid nicking the fabric when trimming away the backing: Hold the backing while trimming and let the garment drape. Be sure to face it so you can see both the edge of the design and the fabric while you are trimming.

DOCUMENTS & INFORMATIONAL SHEET

E-Zee Cut® Super Hefty Plus Just Right 3.1 Instructional sheet.pdf

Available Combo Deals