<b/r>

 

Stitch Density Guide

STITCH DENSITY GUIDE

Due to the different thread types and thicknesses, the stitch density needs to be adjusted when digitizing. In some cases, different embroidery needles are needed.

 

The following chart shows the stitch density and the appropriate needle sizes that are suitable for each embroidery thread. Having the proper combination of stitch density and needle sizes is important

and will lead to a satisfactory embroidery result.

 

 

THREAD TYPE

SATIN STITCH

per cm

STITCH DENSITY

based on

?10 mm

STITCH DENSITY

based on

1 mm

 

NEEDLE SIZE

CLASSIC 60

57

3.5

0.35

60/8 - 65/9

CLASSIC 40

51

4.0

0.40

65/9 - 75/11

CLASSIC 30

41

5.0

0.50

75/11

CLASSIC 12

25

8.0

0.80

100/16

POLYNEON 75

94

2.0

0.20

60/8

POLYNEON 60

57

3.5

0.35

60/8 - 65/9

POLYNEON 40

51

4.0

0.40

60/8 - 75/11

POLYESTER CR 40

 

3.5 - 4.0

0.35 - 0.40

65/9, 70/10, 75/11

FS 50

57

3.5

0.35

65/9 - 75/11

FS 45

51

4.0

0.40

80/12 - 90/14

FS 40

51

4.0

0.40

65/9 - 75/11

FS 30

41

5.0

0.50

80/12 - 90/14

FS 20

27

8.0

0.80

100/16

SUPERTWIST 30

30

6.0

0.60

80/12 - 90/14

BURMILANA 12 / CO

23

9.0

0.90

100/16

FROSTED MATT 40

51

3.0 or 4.0

0.30 or 0.40

60/8 - 75/11

LUNA 40

51

4.0 or 5.0

0.40 or 0.50

75/11 - 80/12

FIRE FIGHTER 40

51

4.0

0.40

75/11 - 80/12

MONOLON

60

3.5

0.35

65/9

 

All tips are only to be considered as rough guidelines and may vary depending on the fabric used.

Guidelines for bottom thread use: For standard length stitches, the general requirement

for bottom thread is around 3 m per 1000 stitches.

Top thread: You can expect approximately 5 m per 1000 stitches.

Correct thread tension: Perfectly tensioned embroidery with standard-length stitches should have around one third of the bottom thread visible on the stitches underneath!