R18-75.8 E-ZEE CUT® GREEN MEDIUM WEIGHT

R18-75.8 E-ZEE CUT® GREEN MEDIUM WEIGHT

R18-75.8 E-ZEE CUT® GREEN MEDIUM WEIGHT
R18-75.8

Product Description

7.5inx8in 250/pk WHITE

This product ships from the OH location


E-Zee Cut® Green is Madeira’s new eco-friendly stabilizer that will help you create sustainably-produced premium embroidery. 

Made from 100% recycled polyester, E-Zee Cut® Green is a medium weight cut away stabilizer for embroidering with knits and lightly woven fabrics.  When paired with Madeira Polyneon Green embroidery thread, you’re creating beautiful, durable embellished garments in the most environmentally-responsible way possible.

The sustainable E-Zee Cut® Green backing is available in a sheer, medium weight 1.7 oz. with the ability to stabilize stitching in all directions.  Due to the stable, non-stretch quality of E-Zee Cut® Green, these backings will not slip on the embroidery frame. As a medium weight, it is ideal for thinner fabrics.  Use 2 layers for heavier material and denser designs.

E-ZEE Green Cut comes in two convenient roll widths of 7.5 inches or 40 inches to avoid waste and time when cutting to fit your hoops. The wider width roll is suitable for larger designs, while the narrower rolls are ideal for daily use with standard left chest round hoops.

Specifications:

  • E-Zee Cut® Green 1.7 oz. backing
  • Cut Away stabilizer
  • Medium weight
  • White
  • 7.5" x 8" pre-cuts
  • 250 pieces per pack

Use in conjunction with:

For use with:

  • Stretchy knit fabric
  • Lightweight woven fabric
  • Unstable fabric

How to use:
Cut a piece from a roll or use a piece of pre-cut to fit your hoop size. Hoop by placing the backing underneath the garment. Embroider the design and remove the embroidered item from the hoop. Trim the excess backing with a sharp pair of scissors or shears, leaving approximately ¼” around the outside of the design. Rounding the corners instead of leaving them square or pointed will prevent curling later on.

Helpful Hint:
To avoid nicking the fabric when trimming away the backing: Hold the backing while trimming and let the garment drape. Be sure to face it so you can see both the edge of the design and the fabric while you are trimming.

DOCUMENTS & INFORMATIONAL SHEET

Available Combo Deals