4.5inX7in 250/PK WHITE
E-Zee Cap® Just Right 2.5 oz. is a medium weight Tear Away stabilizer that is cut specifically to fit in cap frames.
A single piece can be used for small to medium size designs on low profile caps or use two pieces for larger designs on high profile caps. Tension is maintained with the use of a cap stabilizer, resulting in clean, clear and crisp designs. Available in white and black.
- E-Zee Cap Just Right 2.5 oz. cap backing
- Heavy weight
- Tear Away stabilizer
- 4.5" x 7" pre-cuts
- 250 pieces per pack
For use with:
- Heavy twill fabric
- Heavy denim fabric
- Structured baseball caps
- Other structured caps
To prevent “flagging”, be sure that the design is digitized for caps. These designs should stitch from the center out and from the bottom up. Keep the designs within the allotted sewing area of your cap and frame. Most caps require a sharp needle. If you experience needle or thread breaks try using a #80/12 standard eye needle. Using a longer piece of backing that covers two-thirds of the cap may help with hooping.Choose caps that work best with your machine. Underlay stitches can also assist in avoiding “flagging.”
DOCUMENTS & INFORMATIONAL SHEETS
E-Zee Cap® Just Right 2.5 backing product sheet.pdf