24inx25yd ROLL WHITE
E-Zee Weblon Mesh 1.6 oz. is made of polyester fibers.
This product is made of polyester fibers with a melting point of 450°F to 460°F. This soft, mesh Cut Away stabilizer is great for infant and children's wear.
- E-Zee Weblon Mesh 1.6 oz. backing
- Medium weight
- Cut Away stabilizer
- 24" x 25 yard roll
For use with:
- Madeira Fire Fighter embroidery thread
- Madeira Flame Resistant bobbins
How to use:
Cut a piece from a roll or use a piece of pre-cut E-Zee Weblon Mesh to fit your hoop size. Hoop by placing the stabilizer underneath the garment. Embroider the design and remove the embroidered item from the hoop. Trim the excess stabilizer with a sharp pair of scissors or shears, leaving approximately ¼” around the out side of the design. Rounding the corners instead of leaving them square or pointed will avoid curling later on.
To avoid nicking the fabric when trimming away the stabilizer, hold the stabilizer while trimming and let the garment drape. Be sure to hold it with the back side facing up so you can see both the edge of the design and the fabric while you are trimming.
DOCUMENTS & INFORMATIONAL SHEETS